Here is how to do that
The First step is to download hydra either from it's homepage (www.thc.org/thc-hydra/). Choose the windows version and hit download.Download the zip file, extract it, and make sure you see the files below:
If you do, that's good. Go to Start > Run > cmd to open the command prompt. Then change to your hydra folder using the “cd” command. For example my hydra folder was on the desktop, so I did this:
Now that you've done this, it's time to execute Hydra for the first time! Sorry Windows fans, but there is only a GUI for Hydra for Linux systems, you you're gonna have to do it the old fashioned way. Just type “hydra.exe” without quotes, and watch the result:
Now we have to find some IP’s to attack and we will do it by ip scanning using Nmap. You can download it from here – make sure to download the windows installer.after installing it,find out your IP address, so that you know a possible IP range. In the command prompt sessions, type “ipconfig” and watch the results:
In my case, the range is at least 10.1.1.1-4, but I'll go from 1 to 10 just to be safe. Fire up Nmap and do a ping scan “nmap -sP 10.1.1.1-10” to see what hosts are alive, and wait for the results:
Pick a host to port scan – I picked 10.1.1.1 because it is a router, and for most people the password is generally pretty simple, if not default. Port scan it using something like “nmap -sS -sV -P 0 -T5 -O 10.1.1.1” and see if it's running any services (click on the “Ports/Hosts” tab at the end for a simpler view of the services running and their ports). If you dont understand on how to use NMAP,read the basics here
Now we will be attacking the Telnet port because I know that it works, because I know you guys think Telnet is the be-all and end-all of hacking, and because the Windows version of THC-Hydra isn't compiled with LIBSSH support (unless you did it yourself), and as such I can't attack SSH – otherwise I'd be doing that instead. It's so much better. Head back to your command session, and review the output from Hydra before; it tells you the services it can crack. After looking through it, and realising that Telnet definitely is there, we can now proceed to attack it with the command
“hydra -l admin -P passlist.txt 10.1.1.1 telnet”as is demonstrated here:
An explanation of the command: -l admin was used because I assumed that the router would have the login of “admin”. You can use username lists as well if you wish. -P passlist.txt specified a password dictionary named “passlist.txt” - make sure to have the -P include the capital P, otherwise you'll be specifying a password to try.
10.1.1.1 is the routers IP address, and telnet is the protocol we want to attack. Now obviously we could tell it to attack that protocol on a different port, but we won't bother with that right now unless anyone else wants to see how. My dictionary only included 4 words for the purpose of this tutorial. You can see the cracked password circled at the end (which by the way, isn't my password for the router, for those of you who know how to get my IP and wanna try and break in :P). And that's how to do a basic hydra service crack on Windows.
POSTED BY XERO.GREYHAT SECURITY.AN ARTICLE BY PHOENIX910.ALL RIGHTS RESERVED.